Mercury Plus V3.0

ELEGOO is a globally recognised leader in consumer and prosumer 3D printing, founded by a team of engineers dedicated to making advanced manufacturing accessible to everyone. Known for combining innovation, reliability, and affordability, ELEGOO develops printers that empower creators - from beginners and educators to professional designers and engineers.

The Mercury Plus V3.0 represents ELEGOO’s continued innovation in post-processing solutions, delivering enhanced efficiency, safety, and thoroughness for resin 3D printing while maintaining user-friendly operation.

With the Mercury series, ELEGOO introduces next-generation washing and curing designed for resin prints, faster post-processing workflows, and intelligent dual-mode operation suited for hobbyist, prototyping, and production environments.

The Elegoo Mercury Plus V3.0 features a integrated 2-in-1 design that seamlessly transitions between washing and curing modes. This system unlocks a new level of efficiency by allowing users to clean and fully cure resin models in a streamlined process - without requiring separate machines or messy manual setups. This is especially important for miniatures, engineering prototypes, educational models, jewellery designs, and retail-ready prints, where surface finish, detail preservation, and structural integrity matter. Built with an optimized wash bucket system, high-power UV light array, and intuitive control interface, the Mercury Plus V3.0 delivers reliable, high-quality results for makers, professionals, and production environments alike, while remaining easy to use for beginners thanks to its simple setup, clear display, and user-friendly operation.

Featuring sealed washing containers, multi-angle UV LED coverage, and adjustable timing controls, the Mercury Plus V3.0 enables thorough cleaning and uniform curing of functional resin models and detailed miniatures. Its protective UV-blocking cover plays a critical role in blocking high percentages of harmful ultraviolet light during operation, which safeguards the user's eyes and prevents unintended curing of ambient resin - especially when operating in active workspaces. The enclosed design also helps contain cleaning solvents and fumes while enhancing user safety with automatic cutoff sensors, making it ideal for both home setups and professional studio environments.

The combination of dual-function versatility and reliable safety features makes the Mercury Plus V3.0 ideal for users expanding their resin 3D printing workflow into consistent, professional-grade post-processing.

You can easily access user guides, recommended cleaning agent safety sheets, and supporting documentation directly from the ELEGOO Africa website, where setup resources are available for download. This ensures you are working with the most up-to-date guidance optimized for the Mercury Plus V3.0, allowing for a smooth setup process, simplified post-processing preparation, and the best possible print finishing results from day one.

Key Features:

Integrated 2-in-1 wash and cure functional design
High-density UV LED array for uniform curing
Sealed washing container to minimize solvent odor
Automatic safety sensor pauses operation when lid is removed
360-degree rotating turntable for complete UV exposure
Adjustable time settings for precise post-processing control
Quiet motor operation during washing and curing cycles
Touch button user interface with clear digital display
Compatible with most LCD, DLP, and SLA resin prints
Optimized for detail retention and non-tacky print surfaces

Technical Specifications:

Post-Processing Technology: Dual-mode Resin Washing & Curing
Control System: Microcontroller with digital timer
Light Source: High-efficiency UV LEDs
UV Wavelength: 405 nm
Turntable Mechanism: 360° automatic rotating platform
Safety Sensor: Magnetic cover detection auto-pause switch
Power Supply: Dedicated external DC power adapter
Mainboard: Optimized low-noise motor controller

Performance:

Cleaning Speed Options: Adjustable multi-speed washing
Curing Time Range: 1 to 30 minutes (adjustable)
Turntable Rotation Speed: Optimized constant speed
UV Light Distribution: Multi-angle focused array
Operating Noise Level: Ultra-quiet motor drive

Optimized washing and curing cycles prevent warping, surface cracking, or incomplete resin curing.

Capacity & Volume:

Wash Container Capacity: High-volume sealed washing tub
Max Washing Volume (with Basket): Approx. 180 × 120 × 200 mm
Max Washing Volume (Suspended Build Plate): Fits standard desktop resin build plates
Max Curing Volume: Approx. 200 × 200 × 260 mm

Generous working volume supports both larger single prints and batch post-processing of smaller parts.

Safety & Protective System:

UV Blocking Cover: Translucent light-shielding hood (blocks >99.9% UV light)
Solvent Management: Sealed lid container to minimize volatile chemical fumes
Safety Interlock: Auto-shutoff when the protective cover is raised

Enhanced safety features protect users from UV exposure and help keep workspace air clean.

User Interface:

Display: Digital LED segment screen
Interface Type: Touch-sensitive buttons

Functions Include:

Mode switching (Wash / Cure)
Time setting (Increase / Decrease)
Start / Pause / Stop
Cycle monitoring

Connectivity & Operation:

Operating Modes: Standalone operation (no external PC required)
Controls: On-device touch interface
Input Power Connection: Standard DC jack

Mechanical & Physical Specifications:

Body Material: Durable engineering polymers and metal reinforcement
Machine Dimensions: Approx. 230 × 230 × 380 mm
Net Weight: Approx. 3.8 kg
Turntable Type: Removable acrylic plate
Lighting System: 405nm directional UV LED array

Compact footprint fits easily alongside resin 3D printers in limited workspace areas.

Power Requirements:

Input Voltage: 100–240V AC
Frequency: 50/60 Hz
Rated Power: 48W / 60W power system

Cleaning Liquid Compatibility:

Supports standard cleaning solvents, including:

Isopropyl Alcohol (IPA) 95%+
Bio-Ethanol / Denatured Alcohol
Water (for Water-Washable Resins)
Dedicated Resin Cleaner Solutions
Sealed container hardware prevents degradation from common cleaning solvents.

Smart Features:

Integrated dual washing and curing functions
Auto-pause safety feature on lid removal
360° rotating curing platform
Touch interface control
Adjustable timer memory
Sealed wash tub to reuse cleaning liquid safely

What’s in the Box:

1 X ELEGOO Mercury Plus V3.0 Machine Base
1 X UV-Blocking Protective Cover
1 X Sealed Wash Bucket
1 X Stainless Steel Cleaning Basket
1 X 360° Rotating Curing Turntable
1 X Build Plate Suspension Bracket
1 X Power Adapter & Cable
1 X Tool Kit & Manual

Post-Processsing

Filters

Mercury Plus V3.0

Stay in the know